Subaru 2004 Forester Owner's Manual page 173

Climate control
1. Set the air inlet selection button to the OFF position
2. Set the air flow control dial to the "
3. Set the temperature control dial to the most com-
fortable level.
4. Set the fan speed control dial to the desired speed.
NOTE
Warm air also comes out from the right and left air
outlets. To stop warm air flow from these outlets,
turn the corresponding thumb-wheel down.
Bi-level heating
This setting allows you to direct air of different temper-
atures from the instrument panel and foot outlets. The
4-8
air from the foot outlets is slightly warmer than from the
" position. instrument panel outlets.
1. Set the air inlet selection button to the OFF posi-
tion.
2. Set the air flow control dial to the "
3. Set the temperature control dial to the desired tem-
perature level.
4. Set the fan speed control dial to the desired speed.
Setting the temperature control dial fully turned to the
red area or blue area decreases the temperature dif-
ference between the air from the instrument panel out-
lets and the air from the foot outlets.
Ventilation
HS4016AA
" position.
HS4017AA