To Change The Cruising Speed - Subaru 2004 Forester Owner's Manual

Starting and operating

To change the cruising speed

To increase the speed (by control lever)
Push the control lever upward in the "ACCEL, RE-
SUME" direction and hold it until the vehicle reaches
the desired speed. Then, release the control lever.
The vehicle speed at that moment will be memorized
and treated as the new set speed.
When the difference between the actual vehicle speed
and the set speed is less than 4 mph (6.8 km/h), the
set speed can be increased 1 mph (1.6 km/h) each
time by pressing the control lever upward in the "AC-
CEL, RESUME" direction quickly within 0.5 second.
7-34
To increase the speed (by accelerator pedal)
1. Depress the accelerator pedal to accelerate the ve-
hicle to the desired speed.
HS7018EA
2. Push the control lever downward in the "SET,
COAST" direction once. Now the desired speed is set
and the vehicle will keep running at that speed without
depressing the accelerator pedal.
NOTE
If the difference between the actual vehicle speed
when the control lever is pushed downward and
the speed last time you set is less than 4 mph (6.8
km/h), the vehicle speed will be lowered by 1 mph
(1.6 km/h). This occurs because the cruise control
HS7018CA