Cps (Content Protection System); Handling Of Microp2 Memory Card Recorded Data - Panasonic AJ-PX230E Operating Instructions Manual

Memory card camera-recorder

page of 169

/ 169
Contents
Table of Contents
Bookmarks

Table of Contents

System mode

1080P

1080i, 720P

480i, 576i

NOTE

t The above table shows values for regular recording. With native recording, even longer recording times are available depending on the system mode.

t Each recording time will be 1/2 for the 32 GB microP2 memory card.

t Indicated capacities include management and other area, so the space available for recording is less than the values in the table above.

Dividing of the clip that is recorded in the microP2 memory card

The recording is continued automatically as a separate clip when the continuous recording time for one recording exceeds the following time. When

thumbnails for clips are handled (displayed, deleted, restored, etc.) on P2 devices, they can be handled as a single clip. Clips may be displayed as

separate clips in nonlinear editing software and on a computer. The recording can continue as a single clip when recording with AVC-LongG codec

on a microP2 memory card that is 32 GB or larger by setting main menu → [RECORDING SETUP] → [FILE SPLIT] to [ONE FILE]. The recording is

divided to approximately 128 second recording files when [SHORT SPLIT] is selected in main menu → [RECORDING SETUP] → [FILE SPLIT], but it

can be operated as one clip when the thumbnail operation is performed on the P2 device. [SHORT SPLIT] is disabled in interval, one-shot, loop, and

background recording modes.

Recording format (excluding native recording)

AVC-Intra 200 (720P)

AVC-Intra 100 (1080P)

AVC-Intra 100 (1080i)

AVC-LongG 50

AVC-LongG 25

AVC-LongG 12

CPS (Content Protection System)

The microP2 memory card supports the security function "Content Protection System" that allows encryption formatting to prevent data leak to third

parties.

To use the CPS function, set a CPS password to the camera, and enable the microP2 memory card authentication and encryption formatting functions.

An encrypted microP2 memory card will be automatically recognized between devices where the same CPS password is set, and recording and

playback of the microP2 memory card are enabled. For details, refer to "Setting CPS password" (page 114).

NOTE

t Setting or deleting of CPS can be performed in the main menu → [CLIP] → [PROPERTY] → [CPS PASSWORD].

t Up to 16 characters can be input.

t The encrypted microP2 memory card is not recognized on the SD card slot in a computer.

t If the card is unable to be recognized, authenticate with the correct password or format and use the card as recording media. Recording data on the

card failed to be recognized cannot be checked. Do not perform any operation other than manual authentication and formatting with the failed card

inserted.

t To access the encrypted card from a computer in the USB device mode, authenticate the encrypted card with P2 Viewer Plus.

Handling of microP2 memory card recorded data

The microP2 memory card is a semiconductor memory card that is used as the recording medium for the professional video production and

broadcasting devices.

f Since the data recorded in the microP2 format is in a file format, it has excellent compatibility with computers. The file structure is a unique format,

which in addition to video and audio data that is converted to the MXF file, it contains various other important information. The P2 format recorded data

is linked as the following folder structure.

Chapter 3 Preparation — microP2 memory card

AVC-Intra 200 30PN

AVC-Intra 200 25PN

AVC-Intra 100

AVC-LongG 25

AVC-LongG 12

AVC-Intra 200

AVC-Intra 100

AVC-Intra 50

AVC-LongG 50

AVC-LongG 25