Table of Contents
Advertisement
Digital E.LS.
Digital Electronic
Image
Before you begin...
oye
o
|
« Set the POWER switch to CAMERA.
Stabilization System
This feature helps stabilize the picture in
situations such as walking or shooting from
a moving vehicle.
I Slide the DIGITAL SELECT switch
to EIS.
2 Press the ElS button to activate the
Digital E.!.S. function. ("EIS" will appear
in the EVF.)
* The image in the EVF will be enlarged
slightly and the shutter speed will
automatically adjust from 1/80 to
1/350 according to the brightness of
the subject.
3 Press the EIS button again to cancel.
* You may also use the High Speed
Shutter function (from 1/100 to 1/
10000). The shutter speed you select
remains active even after you cancel
the Digital E.!.S. function.
e Be sure that the Digital E.1.S. is
NORMAL
turned off when not in use.
Digital E.I.S. may not function when...
+ Camcorder movement is too extreme.
¢ recording a subject with distinct
horizontal or vertical stripes.
SN
* recording in low light situations.
>
* EIS indicator flashes when the light
N
Cain
level is inadequate.
PO
Digital ElS ON
* recording a subject under intense
Y
fluorescent light.
* recording a scene with very fast
motions.
40
Advertisement
Table of Contents
