Table of Contents
Advertisement
Item
[SHOT MARK]
Assigns the shot mark function.
[DEL LAST CLIP]
Assigns the function to delete the clip shot immediately beforehand.
[SLOT SEL]
Assigns the function for switching the card to record when two or more cards are inserted in the microP2 memory card slot.
[AUDIO MON SEL]
Assigns the function to switch between the display of the audio level meter and the audio channel ([CH1]/[CH2] and [CH3]/[CH4]) of
output audio (headphone, built-in speaker, and <HDMI OUT> terminal) while the button is held down.
[REC CHECK]
Assigns the recording check function.
[BACKGR REC
Assigns the function to cancel the background recording of slot 2. Hold down the assigned button for approx. five seconds to stop the
PAUSE]
background recording.
[USB MODE]
Assigns the function to enable/disable the USB device mode.
@
NOTE
t The following functions are also turned off when the camera is turned off.
[WFM]/[D.ZOOM]/[FBC]/[S.GAIN]/[ATW]/[ATW LOCK]/[SPOTLIGHT]/[BACKLIGHT]/[BLACKFADE]/[WHITEFADE]/[Y GET]/[FOCUS ASSIST]/[FAST
ZOOM]/[EVF ON/OFF]/[AUDIO MON SEL]/[USB MODE]
t When [FAST ZOOM] is enabled, the zoom sound becomes louder than usual.
Chapter 3 Preparation — Assigning functions to the USER buttons
Description
– 43 –
Advertisement
Table of Contents
