Table of Contents
Advertisement
r Advanced settings
Configure the settings in the main menu → [SCENE FILE] → [KNEE SETTING].
[KNEE MODE]: Sets the operation mode of knee function ([AUTO]/[MANUAL]/[OFF]).
f When [AUTO] is selected in [KNEE SETTING]
[A.KNEE RESPONSE]: Sets the speed of response. Smaller values make the response faster.
f When [MANUAL] is selected in [KNEE SETTING]
[KNEE MASTER POINT]: Sets the knee point position in 0.5% steps.
[KNEE MASTER SLOPE]: Sets the knee inclination.
[KNEE MASTER SLOPE Rch]: Sets the knee inclination of Rch.
[KNEE MASTER SLOPE Bch]: Sets the knee inclination of Bch.
High color function
This function sets the color dynamic range.
r General settings
[HI-COLOR SW]: Turns the mode that expands the color dynamic range [ON]/[OFF].
[HI-COLOR LVL]: Selects the level of mode that expands the color dynamic range.
r Advanced settings
Use the camera in a general settings.
White clip function
This function sets the brightest part of video signals to be not brighter than a certain level.
r General settings
Use the camera with the factory settings.
r Advanced settings
Configure the settings in the main menu → [SCENE FILE] → [WHITE CLIP SETTING].
[WHITE CLIP]: Turns the white clip function [ON]/[OFF]. When the function is [ON], the setting value of [WHITE CLIP LVL] is enabled.
[WHITE CLIP LVL]: Sets the white clip level.
[Rch CLIP LVL]: Sets the clip level of Rch for white clips.
[Bch CLIP LVL]: Sets the clip level of Bch for white clips.
Chapter 4 Shooting — Adjusting image quality
– 62 –
Advertisement
Table of Contents
