Panasonic AJ-PX230E Operating Instructions Manual page 57

r Messages displayed in the viewfinder and LCD monitor
Status
During adjustment
Adjustment completed
@ NOTE
t During black balance adjustment, the aperture is set to automatically shut out light.
t During recording, black balance cannot be adjusted.
t Recording to the microP2 memory card is not performed by pressing the REC button when the automatic black balance is being executed.
t The gain switching circuit is automatically switched during black balance adjustment. Flicker or noise sometimes appears on the viewfinder screen and
LCD monitor. This is not a malfunction.
Black balance memory
Values stored to memory are saved even if the camera is turned off.
Chapter 4 Shooting — Adjusting the white and black balance
Message
[ABB ACTIVE]
[ABB OK]
– 57 –
Remark
f The adjusted value is automatically stored in
memory.