Table of Contents
Advertisement
User bits settings
Sets the user bits to be recorded in the sub code area in the main menu → [RECORDING SETUP] → [UBG MODE].
Item
[USER]
[TIME]
[DATE]
[TCG]
[FRAME RATE]
[REGEN]
How to input user bits
By setting user bits, information such as memos (date, time) up to eight digits long (hexadecimal) can be recorded.
1
Select [USER] in the main menu → [RECORDING SETUP] → [UBG MODE].
2
Select the main menu → [RECORDING SETUP] → [UB PRESET].
3
Set the user bits using the control stick.
f Screen display
- Push it to the right to move right the digit to be set.
- Push it to the left to move left the digit to be set.
- Push it upward to increase the value of the digit to be set by one.
- Push it downward to decrease the value of the digit to be set by one.
4
Press the control stick, enter the values of user bits, and exit the user bits settings screen.
5
Use the <COUNTER> button to display [UBG] and confirm that the set value is displayed.
NOTE
@
t If you exit the user bits setting screen without pressing the control stick, the set values are disabled.
Retention of user bits in memory
User bit settings are automatically recorded and are retained even if the power is turned off.
Chapter 4 Shooting — Setting the time data
Records internal user values. You can set the user value in the main menu → [RECORDING SETUP] → [UB PRESET]. Setting
values are held even when the power is turned off.
For details, refer to "How to input user bits" (page 97).
Records the time measured by the internal clock.
Records the hour digit of year/month/day/date-time measured by the internal clock.
Records the time code value.
Records the camera photo frame rate information.
When playing back clips recorded in native format, the same frame rate information as VITC UB is output regardless of the
recorded value. Use at this setting when the editing device such as a computer uses the frame rate information of the user bits.
Reads the user bit last recorded to the microP2 memory card that is currently to be recorded to, and records this value without
changing.
Description
– 97 –
Advertisement
Table of Contents
