Using The Adf And Scanner Glass - Lexmark MX717 User Manual

Learning about the printer

Using the ADF and scanner glass

Automatic document feeder (ADF)
Use the ADF for multiple‑page documents including
two-sided (duplex) pages.
You can use the ADF or the scanner glass to scan documents.
Using the ADF
When using the ADF:
•
Load the document into the ADF tray faceup, short edge first.
•
Load up to 150 sheets of plain paper into the ADF tray.
•
Scan sizes from 76.2 x 127 mm (3 x 5 inches) wide to 216 x 635 mm (8.5 x 25 inches) long
•
Scan media weighs from 52 to 120 g/m
•
Do not load postcards, photos, small items, transparencies, photo paper, or thin media (such as magazine
clippings) into the ADF tray. Place these items on the scanner glass.
Using the scanner glass
When using the scanner glass:
•
Place a document facedown on the scanner glass in the corner with the green arrow.
•
Scan or copy documents up to 216 x 355.6 mm (8.5 x 14 inches).
•
Copy books up to 25.3 mm (1 inch) thick.
Scanner glass
Use the scanner glass for single‑page documents, book
pages, small items (such as postcards or photos),
transparencies, photo paper, or thin media (such as magazine
clippings).
2
(14–32 lb).
15