Lexmark MX717 User Manual page 178

Understanding the printer menus
Use
Automatically Observe DST
On
Off
Custom Time Zone Setup
UTC Offset
DST Start Week
DST Start Day
DST Start Month
DST Start Time
DST End Week
DST End Day
DST End Month
DST End Time
DST Offset
Enable NTP
On
Off
NTP Server
Enable Authentication
On
Off
To
Set the printer to use the applicable daylight saving time (DST) start and end
times associated with the printer Time Zone setting.
Note: On is the factory default setting and uses the applicable Daylight
Saving Time associated with the Time Zone setting.
Set up the time zone.
Synchronize the clocks of devices over a network.
Note: On is the factory default setting.
View the NTP server address.
Set the credentials when accessing the NTP server.
Note: Off is the factory default setting.
178