Lincoln 2002 Blackwood Owner's Manual page 205

Replacing high-mount brakelamp bulbs
1. Remove the two screws from the
high-mount brakelamp assembly.
2. Remove the bulb from the lamp
assembly by turning
counterclockwise.
3. Carefully pull the bulb straight
out of the socket and push in the
new bulb.
4. Install bulb socket in lamp
assembly by turning clockwise.
5. Install brakelamp assembly on the vehicle with two screws.
Replacing license plate lamp bulbs
For bulb replacement, see a dealer or qualified technician.
Replacing the interior bulbs
Check the operation of the following interior bulbs frequently:
• Interior overhead lamp
• Map lamp
For bulb replacement, see a dealer or qualified technician.
USING THE RIGHT BULBS
Replacement bulbs are specified in the chart below. Headlamp bulbs
must be marked with an authorized "D.O.T." for North America and an
"E" for Europe to assure lamp performance, light brightness and pattern
and safe visibility. The correct bulbs will not damage the lamp assembly
or void the lamp assembly warranty and will provide quality bulb burn
time.
Function
Headlamps
Front park/turn lamps
Front sidemarker
Foglamps
Dome/map lamps
Turn/tail/brake lamps
Maintenance and care
Number of bulbs
2 9007
2 3157 AK (amber)
2 194 AK (amber)
2 880
2 579
2 3157K
Trade number
205