Lincoln 2002 Blackwood Owner's Manual page 121

1. Position the child safety seat on the seat cushion.
2. Route the child safety seat tether strap over the back of the seat.
3. Locate the correct anchor for the selected seating position. (Shown
with the seats folded down.)
• You may need to pull the
seatback forward to access the
tether anchors. Make sure the
seat is locked in the upright
position before installing the child
seat. Refer to the Folding Down
The Rear Seats section in this
chapter for information on how to
operate the rear seats.
Seating and safety restraints
121