Lincoln 2002 Blackwood Owner's Manual page 204

Maintenance and care
Replacing tail/turn/backup lamp bulbs
1. Open the tailgate dual doors to
expose the lamp assembly nuts.
2. Remove the nuts from the lamp
assembly.
3. Carefully pry the lamp assembly
away from the vehicle to expose the
bulb socket.
4. Rotate the bulb socket
counterclockwise and remove from
lamp assembly.
5. Pull bulb straight out of socket and push in the new bulb.
6. Install the bulb socket into the lamp assembly and rotate clockwise.
7. Carefully install the lamp assembly on the pickup box aligning the
three tabs into the slots.
8. Secure the lamp assembly on the vehicle with the nut.
Replacing rear cornering/backup lamp bulb
1. Reach behind the rear bumper
and remove two nuts from the lamp
assembly.
2. Carefully pull the lamp assembly
outward to expose the electrical
connector.
3. Rotate the bulb socket
counterclockwise and remove.
4. Pull the bulb straight out of the
socket and push in the new bulb.
5. To complete installation, follow the removal procedure in reverse
order.
204