Table of Contents
Advertisement
Adjusting the minimum setting for LPG
Tighten the screw located at the side of the
valve rod clockwise all the way.
Following adjustment to a gas
other than the one originally set in
the factory, replace the gas setting
label on the appliance with the
one corresponding to the new
type of gas. The label is inserted
inside the nozzle pack (where
fitted).
Lubricating the gas valves
Over time the gas valves can become
difficult to turn and get blocked. Clean them
internally and replace the lubrication
grease.
Lubrication of the gas valves be
performed by a specialised
technician.
Burner and nozzle characteristics table
NG 1.0 kPa
Nominal gas consumption (MJ/h)
Injector (1/100)
NG 2.75 kPa
Nominal gas consumption (MJ/h)
Injector (1/100)
82
Installation
Dimensions
Position of gas and electrical connections.
A
B
C
D
AUX
SR
3.9
7.5
90
120
AUX
SR
3.9
6.3
54
68
48
738
124
97
R
DUAL int + ext
12
15.2
155
80 + 165
R
DUAL int. + ext.
10.8
15.2
88
46 + 94
Advertisement
Table of Contents
