Removing The Door - Smeg A11XPY-9 Manual

Setting of programmed pyrolytic cycle
It is possible to program the pyrolytic cycle
start time like all other cooking functions.
1. After selecting the pyrolytic cycle
duration, press the control knob. The
display shows the current time and the
symbol comes on.
2. Turn the control knob to set the time you
wish the pyrolytic cycle to finish.
After a few seconds, the symbols
remain lit steadily and the appliance
waits for the set start time in order to start the
cleaning cycle.
It is not possible to select any
function once the door lock device
has been activated. It remains
possible, however, to switch off the
appliance using the specific
controls.
Cleaning and maintenance
and

4.6 Removing the door

For easier cleaning, it is recommended to
remove the door and to place it on a tea
towel.
To remove the door proceed as follows:
1. Open the door completely and insert two
pins into the holes on the hinges shown in
the figure.
2. Grasp the door on both sides with both
hands, lift it forming an angle of around
30° and remove it.
71