Appliance Purpose; Manufacturer Liability; This User Manual; Identification Plate - Smeg A11XPY-9 Manual

• At the end of the installation,
check for any leaks with a soapy
solution, never with a flame.
• Have the electrical connection
performed by authorised technical
personnel.
• The appliance must be connected
to earth in compliance with
electrical system safety standards.
• Use cables withstanding a
temperature of at least 90 °C.
• The tightening torque of the
screws of the terminal board
conductors must be 1.5 - 2 Nm.
For this appliance
• Before replacing the bulb, switch
off the power supply to the
appliance.
• Do not rest any weight or sit on
the open door of the appliance.
• Take care that no objects are
stuck in the doors.

1.2 Appliance purpose

• This appliance is intended for
cooking food in the home
environment. Every other use
is considered improper.
• The appliance is not designed to
operate with external timers or
with remote-control systems.
Instructions

1.3 Manufacturer liability

The manufacturer declines all liability
for damage to persons or property
caused by:
• use of the appliance other than
the one envisaged;
• non-observance of the user
manual provisions;
• tampering with any part of the
appliance;
• use of non-original spare parts.

1.4 This user manual

This user manual is an integral part
of the appliance and must therefore
be kept in its entirety and in an
accessible place for the whole
working life of the appliance.
Read this user manual carefully
before using the appliance.

1.5 Identification plate

• The identification plate bears the
technical data, serial number and
brand name of the appliance.
Do not remove the identification
plate for any reason.
• The appliance is provided with a
duplicate identification plate to be
attached to the back of the
instruction manual.
9