Advertisement
Taillamps
1.
Open the tailgate.
2. Remove the screws from
the lamp assembly near
the tailgate latch.
3. Pull the assembly away from the pickup side panel.
4. Turn the socket to the left to remove it. Push the tab
in while you turn the socket.
5. Pull the bulb out.
6. Push the new
bulb into
the socket.
7. Put the socket into the assembly and turn the socket
to the right until
it
locks in place.
8.
Replace the assembly. Install and tighten the screws.
9. Close the tailgate.
Windshield Wiper Blade Replacement
See "Normal Maintenance Replacement Parts" in the
Index for the proper type of replacement blade.
I
NOTICE:
Use care when removing or installing a blade
assembly. Accidental bumping can cause the arm
to fall back and strike the windshield.
I . To remove the old wiper blades, lift the wiper arm
until it locks into
a vertical position.
Advertisement
