Advertisement
5. Turn the bulb assembly to the left to remove it.
6. Put the new bulb assembly into the headlamp
7. Plug in the electrical connector.
8. Put the headlamp lens assembly back into the
assembly and turn it to the right until it is tight.
vehicle. Install the two retaining clips.
One-Piece Front lbrn Signal Lamp Assembly
1. Remove the headlamp assembly as shown under
"One-Piece Composite Headlamp System" earlier in
this section.
3.
4.
5.
6.
2. Twist the bulb socket to
remove it from the
headlamp assembly.
Pull the bulb straight out to remove it from
the socket.
Push the new bulb into the socket until it snaps
into place.
Put the bulb socket into the lamp assembly and twist
it to the right until it is tight.
Put the headlamp assembly back into the vehicle.
Install the two retaining clips.
6-37
Advertisement
