Table of Contents
Advertisement
Follow this diagram to store the underbody-mounted
spare.
1.
2.
3.
A. Retainer
B. Valve Stem (Pointed Down)
C. Spare or Flat Tire
D. Spring
E. Wheel Wrench
E Lower
G. Raise
H.
Hoist Arm
Put the tire on the ground at the rear of the vehicle,
with the valve stem pointed down and to the rear.
Pull the retainer through the wheel.
Put the chisel end of the wheel wrench, on an angle,
through the hole in the rear bumper and into the hoist
shaft. Turn the wheel wrench to the right until the
tire is raised against the underside of the vehicle.
You will hear two "clicks" when the tire is secure,
but pull on the tire to make sure.
5-31
Advertisement
Table of Contents
