Table of Contents
Advertisement
Using Cruise Control on Hills
How well
your cruise control will work on hills depends
upon your speed, load and the steepness of the hills.
When going up steep hills, you may want to step on the
accelerator pedal to maintain your speed. When going
downhill, you may have to brake or shift to a lower gear
to keep your speed down. Of course, applying the brake
takes you out of cruise control. Many drivers find this to
be too much trouble and don't use cruise control on
steep hills.
Ending Cruise Control
There are two ways to turn off the cruise control:
0
Step lightly on the brake pedal or push the clutch
pedal, if you have a manual transmission.
0
Move the cruise switch to OFF.
Erasing Speed Memory
When you turn off the cruise control
or
the ignition,
your cruise control set speed memory is erased.
Exterior Lamps
0
Your parking lamp and headlamp switch is on the
driver's side of your instrument panel.
Rotate the knob to the right to the parking lamps symbol
to manually turn on:
0
Parking Lamps
Sidemarker Lamps
0
Taillamps
0
License Plate Lamps
Instrument Panel Lights
2-40
Advertisement
Table of Contents
