Table of Contents
Advertisement
Connecting Wired Remote
Control
You can operate the functions of this unit with a
wired remote control.
Memo :
When the switches of the camera recorder and
0
remote control unit are operated at the same
time, the switch operation of the remote control
unit takes priority over that of the camera
recorder.
1 Connect a wired remote control to the
camera recorder.
Connect the wired remote control (sold
separately) to the [REMOTE2] terminal of this
camera recorder.
.
Caution :
Turn off the power of the camera recorder when
0
connecting a wired remote control.
2 Turn on the power of the camera recorder.
Connecting Wired Remote Control
164
Connect the wired
remote control
Connecting a Remote
Control Unit
The switch functions of the camera recorder can be
configured using the remote control unit.
* Remote control units supported: RM-LP25U,
RM-LP55U, RM-LP20G
1 Connect the remote control unit to the
camera recorder.
Connect the remote cable of the remote control
unit to the [REMOTE1] terminal located at the
terminal section of this camera recorder.
RM-LP25U
.
Caution :
Turn off the power of the camera recorder when
0
connecting a remote control unit.
2 Turn on the power of the camera recorder.
3 Set the operate switch of the remote control
unit to ON.
Memo :
For details on the functions operable from the
0
remote control unit, please refer to [Functions
Operable from the Remote Control Unit]
(A P 166).
Advertisement
Table of Contents
