Main Features - JVC GY-HM890U Instructions Manual

Hd memory card camera recorder
Hide thumbs Also See for GY-HM890U:
Table of Contents

Advertisement

Main Features

Inheriting the compact shoulder-carry
style
Inheriting the compact shoulder-carry style of the
GY-HM700 series, this camera recorder enables
more stable shooting while maintaining the same
weight as handheld models.
F11 Sensitivity, 1/3-inch Full HD 3CMOS
Sensors
This camera recorder is equipped with three 1/3-
inch 2.07M pixels full HD CMOS sensors.
It delivers high image quality with a high color
resolution through the processing of individual R,
G, B color signals. 12-bit signal processing and the
new 2D DNR removes dark current and optical shot
noise without losing S/N and high resolution,
thereby achieving high F11 sensitivity.
Equipped with the newly-developed
Fujinon 20x interchangeable zoom lens
with AF/OIS A C
It ensures high magnification of 29 mm at wide
ends, and provides high sensitivity across all
regions with F1.6-3.0.
This interchangeable lens comes with an
autofocus (AF) and Optical Image Stabilizer (OIS)
function, allowing for stable focusing when used as
a shoulder-carry camera recorder.
In addition to the central area, it also comes with a
face-detection autofocus feature, and supports
switching to manual focusing.
The zoom ring with zoom ring pin enables zooming
from the wide end to the tele end in 90 degrees.
Focus and iris control are also possible using
separate rings.
4-position ND Filter
This camera recorder incorporates three types of
ND filters.
Adjust the amount of light according to the
brightness during shooting by switching the 4-
position ND filter (OFF, 1/4, 1/16, 1/64).
JVC's Proprietary FALCONBRID High-
Quality Imaging Engine
The FALCONBRID high-quality imaging engine
omits unnecessary processing through
incorporating camera processing and image
compression on a single chip. Images from
imaging devices are compressed and processed
without any loss thereby achieving high-quality
images.
Main Features
12
MPEG2 and H.264 Codec
FALCONBRID allows users to select a recording
format such as MPEG-2, H.264 and AVCHD
Progressive, the most commonly used codec for
professional videos.
50 Mbps high-resolution recording
mode
This camera recorder comes with a 50 Mbps mode
in the H.264 format (1920x1080: MOV) to support
high-resolution video recording.
QuickTime (MPEG-2 HD/H.264 HD/
H.264 SD)/MP4 (MPEG-2 HD)/AVCHD
File Formats
Inheriting the concept of ProHD memory camera
recorders, this camera recorder also supports
various file formats, such as AVCHD and
QuickTime (H.264 SD) files, as well as QuickTime
(MPEG-2 HD/H.264 HD) files that can be directly
edited on Apple Final Cut Pro, in addition to MP4
files that are most suitable for XDCAM EX
Nonlinear Editing Workflow.
Two SDHC/SDXC Card Slots for Dual,
Backup and Series Recording
The most common SDHC/SDXC card recording
system is used as the memory card.
This ensures reliability and operation at low running
cost.
Various user friendly recording systems are also
available. These include dual recording of the
same file to two cards, and using REC/STBY to
break up video clips in one card while performing
backup recording to the other card.
Diverse simultaneous recording
combinations (HD and SD, HD and
Proxy Video, etc.)
This camera recorder is equipped with a proxy
video (960x540: MOV, 480x270: MOV,
1440x1080: AVCHD) recording function that is
convenient for network distribution.
Further enhancements were made to the dual
recording feature, allowing for HD recording to one
of the SDHC/SDXC cards, and SD or proxy video
recording to the other card at the same time.
Variable frame recording
Enables beautiful slow motion and quick motion
image recording such as overcrank and
undercrank.
Th ability to change the frame rate during recording
enables quick to gradually slow motion effects.

Advertisement

Table of Contents
loading

Table of Contents