Connecting A Earphone - JVC GY-HM890U Instructions Manual

Connecting a Earphone

Audio output from the [PHONES] terminal can
0
be selected using the [A/V Set] B [Monitor] item
or the [MONITOR] selection switch on the
camera recorder.
(A P129 [ Monitor ] )
The different combinations of settings that are
0
output from the [PHONES] terminal and monitor
speaker are as follows.
[MONITOR]
[Monitor]
Selection
Setting
Switch Setting
[CH-1] -
[BOTH] [Mix]
[Stereo]
[CH-2] -
.
[PHONES]
Terminal
Speaker
L R
CH-1 CH-1
CH-1+CH-2 CH-1+CH-
2
CH-1 CH-2
CH-2 CH-2
1 Connect a earphone.
2 Select the channels to monitor using the
different combinations of the left and right
[MONITOR SELECT] switches.
[MONITOR
Channels to
SELECT]
Monitor
Setting
[CH-1]
.
[CH-2]
.
[CH-1]/[CH-2]
.
[CH-3]
.
[CH-4]
.
[CH-3]/[CH-4]
.
3 Use the [MONITOR] adjustment knob to
adjust the monitor volume.
Connecting a Earphone
Description
Outputs the audio
recorded in
[CH-1].
Outputs the audio
recorded in
[CH-2].
Outputs the audio
recorded in
[CH-1] and
[CH-2].
Outputs the audio
recorded in
[CH-3].
Outputs the audio
recorded in
[CH-4].
Outputs the audio
recorded in
[CH-3] and
[CH-4].
163