Table of Contents
Advertisement
Operation Mode
Camera Mode
0
0
0
0
Memo :
0
Media Mode
0
0
0
USB Mode
0
0
0
Memo :
0
0
0
Remote Edit Mode
0
0
Memo :
0
0
This is the camera shooting mode. The camera recorder starts up in Camera mode when
the power is turned on.
Camera images are output on the viewfinder and LCD monitor. When a recordable SD card
is inserted, the camera recorder enters the recording standby mode. "STBY" appears on
the operation mode display area of the LCD monitor and viewfinder.
Press the [REC] trigger button to start recording.
When [System] B [Record Set] B [Record Format] B [System] is set to "HD(SDI In)" or
"SD(SDI In)", and the device is connected to the [SDI IN] terminal, the SDI input video is
displayed on the LCD monitor or viewfinder. A B
(A P168 [Inputting SDI Signals from an External Device A B] )
Playback of SD card is not possible in Camera mode. However, you can check the most
recently recorded video clip.
(A P83 [Viewing Recorded Videos Immediately (Clip Review)] )
This mode allows you to play back or delete clips recorded on the SD card.
When a playable SD card is inserted, the thumbnail or playback screen is displayed on the
viewfinder and LCD monitor.
Press and hold the [CAM/MEDIA] selection button to enter the Media mode when you are
not shooting in the Camera mode. Once the camera recorder is in Media mode, thumbnails
of the selected media slot are displayed.
This mode allows you to connect to a PC and transfer the files on an SD card to the PC.
(Writing is not allowed)
When the camera recorder is connected to a USB cable, the message "Change to USB
Mode?" appears.
Select [Change] and press the Set button to switch to USB mode.
(A P160 [Managing/Editing Clips on a PC] )
In USB mode, the camera recorder is recognized by the connected PC as a peripheral drive.
(USB mass storage class only)
Disable the connection on the PC and remove the USB cable from the camera recorder to
switch to Camera mode.
(A P160 [Managing/Editing Clips on a PC] )
When a USB cable is connected during recording, the message appears after recording
stops.
If playback is in progress, the message appears once the files are closed automatically,
such as when playback stops.
Files on the PC cannot be written to the SD card.
This mode enables the list display and editing of the recorded clip data through access to
the clip list display page via a web browser on a smartphone, tablet terminal, or PC.
When you access via a web browser on a smartphone, tablet terminal, or PC, "It is necessary
to change the camera mode to "Remote Edit Mode". Change the mode." appears on the
web browser. Also, "Change to Remote Edit Mode?" is displayed on the display screen of
the camera unit.
Selecting [Change] on the camera recorder and pressing the Set button switches to the
Remote Edit mode, and enables display of the clip list and editing of the clip metadata.
(A P184 [ Clip Metadata ] )
(A P187 [Uploading a Recording Clip via a Web Browser] )
If you access via a web browser on devices such as a smartphone, tablet terminal, or PC
while recording is in progress, the message appears after recording stops.
If playback is in progress, the message appears once the files are closed automatically,
such as when playback stops.
Description
Operation Modes
19
Advertisement
Table of Contents
