Display Of The Equipment's Log (Function Code 80) - Brother MFC260C Service Manual

9.1.4.22 Display of the Equipment's Log (Function code 80)

Function
The machine can display its log information on the LCD.
This procedure allows you to reset the purge count. It is necessary to reset the purge count when the
ink absorber box is replaced with a new one without replacing the main PCB.
Operating Procedure
(1) Press the 8 and 0 keys in this order in the initial stage of the maintenance mode.
The calendar clock appears on the LCD.
(2) Press the Black Start (Mono Start) key. Pressing the key more than ten times calls up the
following log information items on the LCD, one by one. (The following list does not include all
items.)
- Head property code
- PictBridge information
- Ink drop count, indicating how many droplets have been jetted out from each of the ink
cartridges*
- Ink drop count after near-empty, indicating how many droplets have been jetted out from
each of the ink cartridges*
- Total ink drop count, indicating how many droplets the machine has jetted out from each of
the ink cartridges*
- Ink cartridge change count, indicating how many times ink cartridge replacement has been
made for each color*
- Jam count, indicating how many times a paper jam has occurred
- Total page count, indicating how many pages have been printed since the machine was
produced
- PC print page count, indicating how many pages the machine has printed as an output device
of the connected PC
- Color copy page count, indicating how many copies in color have been made
- Black copy page count, indicating how many copies in monochrome have been made
- Memory card print page count, indicating how many pages have been printed from memory
card data (On models without PhotoCapture Center, this counter is always fixed to "0.")
- FAX page count, indicating how many received FAX pages have been printed
- Purge count, indicating how many times the purge operation has been carried out
(With the purge count displayed, pressing the 2, 7, 8 and 3 keys in this order resets the purge
count.)
- Purging record for each purge type
- Wiper count, indicating how many times the wiper operation has been carried out
- Flushing count, indicating how many times the flushing operation has been carried out
(With the flushing count displayed, pressing the 2, 7, 8 and 3 keys in this order resets the
flushing count.)
1
1
after the ink cartridge sensor detects near-empty.
1
since produced
1
9-45
Confidential