Brother MFC260C Service Manual page 357

(3) Press the
The 10-digit base ID code appears on the handset's LCD as shown below.
Base Unit
ID = XXXXXXXXXX
Current BASE=Y
NOTE: Y indicates the base unit number selected in step (1) above.
(4) To return to the standby state, press the C key twice.
NOTE: To display the ID code of another base unit, repeat steps (1) to (3) after returning to the
standby state.
9.2.3.5 EEPROM Parameter Initialization
Function
This function initializes the contents of the EEPROM in the cordless handset to the initial values,
erasing all personal information stored.
NOTE: This function also erases the cordless handset ID code and base ID code which have been
registered to the EEPROM in the cordless handset.
Operating Procedure
(1) On the cordless handset, press the Menu/OK, *, 1, 9, 3, and 7 keys in this order in the standby
state.
The "SW VERSION" appears on the handset's LCD.
(2) Press the
(3) To initialize the contents of the EEPROM in the cordless handset, press the Menu/OK key.
NOTE: Pressing the Menu/OK key immediately starts to initialize the EEPROM without
displaying any confirmation message.
After completion of initialization, the cordless handset automatically returns to the standby state.
or key to display "TEST IPUI" and press the Menu/OK key.
or key to display "EPROM DIRECT."
9-63
Confidential