Antenna & Cordless Pcb Assy (For Models With Cordless Handset) - Brother MFC260C Service Manual

6.1.9 Antenna & Cordless PCB ASSY
(1) Place the upper cover upside down.
(2) Remove the screw from the cordless PCB.
NOTE: Take care not to bend the wire that works as an antenna on the cordless PCB.
(3) Release the antenna wire from the cable guide.
NOTE: Take care not to pull the soldered point of the antenna wire or apply force to that point.
Do not bend or pull the antenna wire.
(4) Remove the screw that secures the antenna and its support together to the upper cover.
(5) Pull the antenna and its support inward and off the upper cover.
(6) Take the antenna & cordless PCB ASSY out of the upper cover.
Wire
(that works as antenna)
Antenna wire
Antenna &
cordless PCB ASSY
Upper cover
placed upside down
(for models with cordless handset)
Cordless PCB
Latch
Soldered point
(Do not pull the
antenna wire.)
Taptite, Torx
pan B M3x10
6 - 3 3
Antenna support
Antenna
Taptite, cup B
M3x12
Antenna support
Confidential
(6_30_2_J)