Transfer Of Received Fax Data And/Or Equipment's Log (Function Code 53); Transfer Of Received Fax Data And/Or Equipment's Log; Stations - Brother FAX-545 Service Manual

8.4.10 Transfer of Received FAX Data and/or Equipment's Log (Function code 53)

Function
This function transfers received FAX data to another machine. It is useful when the machine cannot
print received data due to the printing mechanism defective.
NOTE: The number of files that can be transferred at a time is 99. To transfer 100 files or more,
carry out the following procedure more than one time.
TIP: If there are both color and monochrome data in a file to be transferred, the monochrome data
will be transferred first. If the receiver machine does not support the color function, the sender
machine cannot transfer color data, resulting in an error.
Operating Procedure
(1) Press the 5 and 3 keys in this order in the initial stage of the maintenance mode.
The "FAX TRANSFER" appears on the LCD.
(2) To transfer received files, press the 1 key.
The "1.FAX_TRANSFER" appears. Note that if there is no received file, the "NO
DOCUMENTS" appears.
(3) To transfer the activity report only, press the 2 key.
The "2.REPORT_TRANS" appears.
(4) To check the number of received files, press the 3 key.
The "3.NO. OF JOBS" appears on the LCD.
Press the Menu/Set key, and the number of received files appears, just as "NO. OF. JOBS:
10."
(5) With the "1.FAX TRANSFER" or "2.REPORT TRANS" being displayed, press the Menu/Set
key.
The "ENTER&SET" appears.
(6) Enter the telephone number of the receiver machine and press the Menu/Set key again.
NOTE: Be sure to type the telephone number with the numerical keys. No one-touch dialing is
allowed in this procedure.
The machine displays the "ACCEPTED" for approx. two seconds and starts dialing to transfer
data.
No station ID is attached.
8 - 1 7 Confidential