Table of Contents
Advertisement
How to set the clock
1. Turn the radio on.
2. Press and hold in the "CLOCK" button,
press the "SEEK" button left ( b ) to advance
the hours and right ( a ) to advance the
minutes.
NOTE: The clock displays 12-hour time with
no AM/PM indications.
NOTE: On the High-Level Audio System, the
clock can be set with the radio power
on or off.
Tape error messages
Your cassette tape player is equipped to
diagnose certain problems you may experience.
Error codes are as follows:
Error 0 — Communication error between the
radio controller and the tape controller. The
cassette player will eject the tape. Insert the tape
again. If the same error code appears, turn the
ignition off, then back on again and insert the
tape.
Error 1 — Possible problem cartridge. The
cassette tape player will eject the tape. Insert the
tape again. If the same error code appears in the
display, try a different cartridge.
Error 2 — Tape eject or load failure. Your
cassette tape player will go into the pause mode.
Push "EJCT" to eject the tape. If the tape doesn't
eject, refer the problem to qualified personnel for
service.
172
Hide quick links:
Advertisement
Table of Contents
