Ford 1996 Aerostar Manual page 152

How to eject the tape
To stop the tape and eject the cassette, press the
"EJCT" button. The radio will resume playing if
the radio power is on. The tape cartridge can be
ejected with radio power (and/or ignition) on or
off.
How to store the tape
Press the "AM/FM" button to stop the tape
player and resume radio play. The cassette will
be stored in the tape player and the X symbol
in the display will be lit until you push the
"PLAY PROG" button to resume tape play. Fast
forward and fast rewind can be used while the
tape is in storage mode without interrupting
radio play.
Using the Dolby B noise reduction feature
NOTE: Noise reduction system manufactured
under license from Dolby Labs
Licensing Corporation. "Dolby" and
double-D symbol are trademarks of
Dolby Laboratories Licensing
Corporation.
Push the k button to activate. When on, the
k symbol above the button will be lit.
Clock Operation
How to view the clock mode
Press the "CLOCK" button to alternate the
frequency and time in the display. In the clock
mode, pressing any radio function will
automatically display the radio frequency for
approximately ten seconds before changing back
to the clock mode.
171