Table of Contents
Advertisement
Turn Signal on Chime
A chime will remind you if you leave the turn signal on for
more than three-quarters of a mile (1.2 km) of driving.
If you need to leave the turn signal on for more than
three-quarters of a mile (1.2 km), turn off the signal and
then turn it back on.
Headlamp High/Low-Beam Changer
To change the headlamps from low beam to high or high
to low, push the turn signal lever all the way forward.
Flash-to-Pass
To use the flash-to-pass feature, momentarily pull the
turn signal lever toward you. The high-beam indicator
will flash to indicate to the other driver that you intend
to pass. If the low-beam headlamps are off and you
have the optional fog lamps on, the fog lamps will flash.
While the high beams
are on, this light on the
instrument panel cluster
also will be on. To change
the headlamps from high to
low, pull the lever rearward.
Windshield Wipers
Use the lever located on the right side of the steering
column to operate the windshield wipers.
1
(High Speed): Move the lever to this position for
steady wiping at high speed.
6
(Low Speed): Move the lever to this position
for steady wiping at low speed.
&
(Delay): Move the lever to this position to set a
delay between wipes.
x
(Delay Adjustment): Move the lever to this
position to choose a delayed wiping cycle. Turn the
intermittent adjust band down for a longer delay or up
for a shorter delay. The wiper speed can only be
manually adjusted when the lever is in this position.
3-9
Advertisement
Chapters
Table of Contents
