Chevrolet 2006 Corvette Owner's Manual page 39

Securing a Child Restraint with a Top Tether
CAUTION:
{
If a LATCH-type child restraint is not attached to
anchors, the restraint will not be able to protect
the child correctly. In a crash, the child could be
seriously injured or killed. Make sure that a
LATCH-type child restraint is properly installed
using the anchors, or use the vehicle's safety
belts to secure the restraint, following the
instructions that came with that restraint, and
also the instructions in this manual.
1. Secure the child restraint using the vehicle's
safety belt. See Securing a Child Restraint in
the Passenger Seat Position on page 1-34.
2. If the child restraint manufacturer recommends that
the top tether be attached, attach and tighten the
top tether to the top tether anchor, if equipped.
Refer to the child restraint instructions and
the following steps:
2.1. Find the top tether anchor.
2.2. Press the ribbed area of the trim cover to
open the cover and expose the anchor.
2.3. Route, attach and tighten the top tether
according to your child restraint instructions
and the following instructions:
3. Push and pull the child restraint in different
directions to be sure it is secure.
If the position you are
using has a fixed head
restraint and you are using
a single tether, route the
tether over the head
restraint.
If the position you are
using has a fixed head
restraint and you are using
a dual tether, route the
tether around the
head restraint.
1-33