Windshield Replacement; Taillamps, Turn Signal, And Stoplamps; Replacement Bulbs - Chevrolet 2006 Corvette Owner's Manual

Taillamps, Turn Signal, and
Stoplamps
To replace a stoplamp, taillamp/turn signal bulb, do the
following:
1. Remove the screw from the top of the lamp assembly.
2. Tilt out the lamp assembly.
3. Turn the bulb socket one-quarter turn
counterclockwise and pull it out.
5-54
4. Pull the bulb straight out to remove it from the
socket.
5. Push the new bulb in the bulb socket until it snaps
into place.
6. Reinstall the lamp assembly by first lining up the
tabs on the bottom of the lamp assembly with the
tabs in the vehicle, then slide it in.
7. Replace the screw at the top of the lamp assembly.

Replacement Bulbs

Exterior Lamp
Front Parking/Turn Signal/DRL
Headlamp, High-Beam
Sidemarker
Stoplamp/Taillamp/Turn Signal
For replacement bulbs not listed here, contact your
dealer.

Windshield Replacement

Keep in mind that your windshield is part of the Head-Up
Display (HUD) system. If you ever have to get your
windshield replaced, be sure to get one that is designed
for HUD or your HUD image may look blurred or out
of focus.
Bulb Number
5702KA
H9
W3W
3057KK