Chevrolet 2006 Corvette Navigation Manual

Hide thumbs Also See for 2006 Corvette Navigation:

Getting to know manual (20 pages)

Owner's manual (426 pages)

100

101

102

103

104

105

106

107

108

109

110

page of 110

/ 110
Contents
Table of Contents
Bookmarks

Table of Contents

Quick Links

Chapters

Table of Contents

Summary of Contents for Chevrolet 2006 Corvette Navigation

Page 1 2006 Chevrolet Corvette Navigation Manual Overview ............1-1 Navigation Audio System ........ 3-1 Overview Navigation Audio System ..........1-2 ......3-2 Features and Controls ........2-1 Voice Recognition ........... 4-1 Features and Controls Voice Recognition ........ 2-2 ........4-2 Index ..............1...
Page 2: Canadian Owners
For vehicles ﬁrst sold in Canada, substitute the name General Motors of Canada Limited for Chevrolet Motor Division whenever it appears in this manual. Litho in U.S.A.
Page 3 Section 1 Overview Overview ............1-2 Navigation System Overview ......1-2 Getting Started ..........1-4 Cleaning the Display ........1-12...
Page 4: Overview
Overview Navigation System Overview...
Page 5 F. Power Volume Knob. See “Hard Keys” under Using (Voice Recognition) Key. See “Hard Keys” the Navigation System on page 2-2 for more under Using the Navigation System on page 2-2 for information. more information. DVD (DVD Map Database Eject) Key. See B.
Page 6: Getting Started
Getting Started Entering a destination or alphanumeric text requires many steps, so you can only perform these operations when the vehicle is in PARK (P). You will notice Before you begin to operate the navigation system, that touch-sensitive screen buttons leading to the read this manual thoroughly to become familiar with alphanumeric keyboard are dimmed out while driving.
Page 7 CAUTION: Looking at the moving map on the navigation screen frequently or for too long while driving can cause a crash and you or others can be injured or killed. Keep your eyes and mind on the road and avoid looking too long or too often at the moving map on the navigation screen.
Page 8: Setting Radio Station Presets
Setting Radio Station Presets Setting the Time To set preset radio stations, do the following: To set the time, do the following: 1. Press the power/volume knob to turn the 1. Press the power/volume knob to turn the system on. system on.
Page 9 Setting the Region, Entering an 6. Press the Region screen button. Address and Point of Interest, and 7. Select the appropriate region numbered screen button that contains your ﬁnal destination. Storing a Home Destination and The system will return to the Enter Destination menu. Preset Destinations See Enter Destination on page 2-11 for more information.
Page 10 Entering a Point of Interest (POI) 7. Enter the street name using the alpha keypad on the screen. To set a destination by entering a Point of Do not enter directional information or street type, Interest (POI), do the following: and use the space symbol screen button ( 1.
Page 11 4. Press the MENU screen button. 10. Select the (destination) symbol screen button. 5. Press the Stored Locations screen button. 11. Select the Guide screen button. 12. Once you begin driving you will hear an audio 6. Press the Home screen button. prompt to “Proceed to the highlighted route.”...
Page 12 Storing a Preset Destination 10. Press the OK screen button. 11. Press the back arrow screen button. 1. Press the power/volume knob to turn the system on. The numbered preset destination will be highlighted on the Enter Destination screen. See “Using 2.
Page 13: Stored Locations
Stored Locations 6. Select the (Home symbol) or one of the available preset destination symbols. A map screen will Once a destination has been stored, the address appear with the destination marked. information can then be edited and deleted. See Stored Locations on page 2-30 for more information on other 7.
Page 14: Cleaning The Display
To delete a waypoint or a stored preset destination, 3. Press the Navigation Set Up screen button. do the following: > 4. Press the Guidance Volume screen button. 1. Press the power/volume knob to turn the system on. 5. Select the desired volume or select Off. The system 2.
Page 15: Table Of Contents
Section 2 Features and Controls Features and Controls ........2-2 Route Options ..........2-49 Using the Navigation System ......2-2 Keyless Access System .........2-55 Maps ............2-3 Global Positioning System (GPS) ....2-55 Symbols ............2-5 Vehicle Positioning ........2-56 Nav. (Navigation) Menu .........2-11 Problems with Route Guidance .......2-57 Enter Destination ..........2-11 If the System Needs Service ......2-58 Stored Locations ...........2-30...
Page 16: Features And Controls
Features and Controls DVD (Eject Map Database DVD): Press the eject DVD key next to the DVD loading slot to eject the map DVD. See “Installing the Map DVD” under Maps on Using the Navigation System page 2-3 for more information. This section presents basic information to operate the Power/Volume Knob: Press the power/volume knob to navigation system.
Page 17: Maps
Alpha-Numeric Keypad Touch-Sensitive Buttons Letters of the alphabet, symbols, punctuation, and Touch-sensitive buttons, or screen buttons, are located numbers will be displayed on the navigation screen as on the screen. When a screen button has been an alpha or numeric keypad. The alpha keypad will selected, a beep will sound.
Page 18: Setting The Search Area
Installing the Map DVD Setting the Search Area When your vehicle is delivered from the factory, the See Enter Destination on page 2-11 for information on dealer may have installed the map DVD. If the map DVD changing the search area. was not installed, do the following: Map Adjustments Read the following steps completely before operating...
Page 19: Symbols
Scrolling the Map Symbols The following symbols are the most common symbols Touch anywhere on the that will appear on a map screen. map screen twice and the scroll symbol will appear. Your vehicle is shown as Use this feature to this symbol.
Page 20 When a waypoint has This symbol indicates the been planned, you will see distance and the estimated this symbol on the map. time remaining to the ﬁnal destination or arrival time, depending on the option selected. See Navigation Set Up on page 2-41 for more information.
Page 21 This symbol indicates This No GPS symbol will the map with North Up appear in the upper right (North Up mode). corner of the map screen when your vehicle is not receiving a Global Positioning System (GPS) satellite signal. While in North Up mode, North will always be at the top See Global Positioning System (GPS) on page 2-55 for of the map screen regardless of which direction the more information.
Page 22: Map Appearance
Map Appearance Touch this symbol to set the current route as the destination. Select this symbol from the map screen to display the map appearance options. Touch this symbol to enter a waypoint along the Select from one of the following six options that allow current route.
Page 23 Select the dual view Select the arrow guidance symbol to display two map symbol to display the next screens that will allow turn on the map screen different scale levels and when on route guidance. heading direction for each window. Touch anywhere inside the right screen and the EDIT Directional arrows, street name, and distance to the RIGHT SCREEN screen will display.
Page 24: Auto Reroute
Traveling Across Regions Select the highway guidance symbol to display When driving through regions, the map screen will highway guidance on update to display your current location. To plan the map screen. a destination in a different region, you must change the region for the map DVD to access the correct information.
Page 25: Nav. (Navigation) Menu
Nav. (Navigation) Menu Once a destination entry is complete, regardless of which method was used, a map screen with the Press the NAV hard key to access the map screen. Press destination previewed will display. You can change the MENU touch screen button on the map screen. route preferences, route options, map appearances, or add a waypoint at this time.
Page 26 Region Touch the Region screen button from the ENTER DESTINATION screen to see a list of states included in The ENTER DESTINATION screen displays a map of the highlighted region, or to change the region. The the United States and a part of Canada divided into SEARCH AREA screen will display.
Page 27 Address ﬁve street names available. Select the List screen button at any time to view the available street The address destination entry method allows you to names. The box at the end of the Street entry ﬁeld input an address by providing the system with a street will contain the number of street names available name or city.
Page 28 To input the city name ﬁrst, do the following: 3. The screen to input the street name and house number will display. Input the street name using 1. Touch the City screen button. the alpha keypad. A list of available street names 2.
Page 29 Point of Interest (POI) To input the POI name, do the following: 1. Use the alpha keypad to enter the POI name. The Point of Interest (POI) destination entry method Touch Sym. (symbol) to select symbols and allows you to select a destination from the POI list. numbers for the POI, touch Others to select special characters for the POI, or touch A - Z to return to the alpha keypad.
Page 30 3. The system will display available POIs in the selected sub-category or if the list is too long the system will display the alpha keypad. 4. If the alpha keypad is displayed, input the POI name until a list of available POIs appear. 5.
Page 31 To select a POI by inputting a city name, do the 2. Use the alpha keypad to enter the POI name. following: Touch Sym. (symbol) to select symbols and numbers for the POI, touch Others to select special 1. Select the City screen button, then select: Any City, characters for the POI, or touch A - Z to return to 5 Nearest Cities, Input City Name, or from the Last the alpha keypad.
Page 32 3. Pressing/holding and dragging on the map will activate fast scrolling. Press/touch once on the The map destination entry method allows you to select area to which you would like to move the current a destination by scrolling on the map. position mark.
Page 33 Emergency To use this destination entry method, do the following: 1. Select a category. A list of destination(s) will display The emergency destination entry method allows you to with the name of the destination and the distance enter a destination by selecting from three categories: from your vehicle’s current position.
Page 34 Memory Points To use this destination entry method, do the following: 1. Select the category/folder in which the memory point The memory points destination entry method allows you has been stored. Select from PERSONAL, to select a destination from a list of points that have BUSINESS, ENTERTAINMENT, or MARKED been previously stored.
Page 35 Previous Destination To use the previous destination entry method, do the following: The previous destination entry method allows you 1. Select a previous destination from the list. Use the to select a destination from a list of previous Sort by Name/Date function as necessary. Also destination points.
Page 36 Intersection To use this destination entry method, do the following: 1. Enter the ﬁrst of two streets in the intersection. The intersection destination entry method allows you to A list of available street names will display when set two intersecting streets as your destination. there are less than ﬁve available.
Page 37 Freeway Entrance/Exit To use this destination entry method, do the following: 1. Enter the freeway name. Use abbreviations, such as The freeway entrance/exit destination entry method I - 75, rather than spelling out Interstate. allows you to select a destination by entering a freeway The system will display a list of freeways.
Page 38: Phone Number
Phone Number To use this destination entry method, do the following: 1. Input the phone number of a POI using the The phone number destination entry method allows you numeric keypad. to select a destination by entering a phone number. If the phone number can be found on the map The phone number must be in the list of POIs that DVD, a map screen will appear with the destination...
Page 39 Coordinates To use this destination entry method, do the following: 1. Touch N (North) or S (South) next to LAT (latitude) The coordinates destination entry method allows you to to enter the direction of the latitude coordinate. select a destination by entering latitude and longitude coordinates.
Page 40 Preset Destination Home The preset destination entry method allows you to set a This feature allows you to plan a route to one previously destination by choosing from one of ﬁve previously stored destination that you have selected as a home. If a stored destinations.
Page 41: Getting Started On Your Route
Getting Started on Your Route Route Preference: Touch this screen button to access the ROUTE PREFERENCES screen to adjust the Once a destination has been entered, you can perform route preferences. The current setting is displayed in one of the following options: the Route Preference section of the map screen.
Page 42 Three Routes After selecting the (destination) symbol, the following screen buttons will become available. The 3 routes screen will give you a selection of selecting three different routes to get you to your destinations. To use the 3 routes option, do the following: 1.
Page 43 From this screen, you can view the following information: • (Toll Road) — This icon shows the distance traveled on toll roads. • (Freeway Travel) — This icon shows the distance traveled on freeways. • (Ferry) — This icon shows the distance traveled by ferry.
Page 44: Stored Locations
Stored Locations Select the Stored Locations screen button from the NAV. MENU to access the STORED LOCATIONS screen. From this screen, you can access the following options: To store a point: 1. Touch the Memory Points screen button from the STORED LOCATIONS screen.
Page 45 To edit the name of a stored point: To change the icon associated with a memory point: 1. Touch the Memory Points screen button from the 1. Touch the Memory Points screen button from STORED LOCATIONS screen. the STORED LOCATIONS screen. 2.
Page 46 To move the memory point from one folder/category to To modify the position of the stored point: another: 1. Touch the Memory Points screen button from the 1. Touch the Memory Points screen button from the STORED LOCATIONS screen. STORED LOCATIONS screen. 2.
Page 47 To change the phone number of a memory point: 5. The system will display the map screen with the position address and a pop-up conﬁrmation 1. Touch the Memory Points screen button from the message. Select Yes to delete the point; select STORED LOCATIONS screen.
Page 48: Avoid Area
Avoid Area 3. Select the desired method of entering a destination to enter the memory point. See Enter Destination on page 2-11 for more information. A map Avoid Area: This feature allows you to store an screen will appear displaying the selected memory area to be avoided while planning a route.
Page 49 To change the name of the point to be avoided: To delete a point to be avoided: 1. Touch the Avoid Area screen button from the 1. Touch the Avoid Area screen button from the STORED LOCATIONS screen. STORED LOCATIONS screen. 2.
Page 50 Destination & Waypoint 5. Repeat Steps 2 - 6 to add up to ﬁve way points to your route. After the ﬁrst waypoint has been saved, the ADD WAY POINT screen will appear and Dest. & Way Pt. (Destination & Waypoint): the waypoint will be on the screen.
Page 51 To change the location of a way point: To delete a way point from the current route: 1. Touch the Dest. & Way Pt. screen button from the 1. Touch the Dest. & Way Pt. screen button from the STORED LOCATIONS screen. STORED LOCATIONS screen.
Page 52 Home 4. Set the destination and touch OK. 5. Touch OK on the map screen and the destination Home: This feature allows you to store, delete, and will be stored. The home icon will now be edit a home point destination. highlighted on the ENTER DESTINATION screen.
Page 53 Previous Destination Preset Destination Previous Dest. (Previous Destination): The Preset Dest. (Preset Destination): This feature system will automatically store up to 100 points that allows you to store up to ﬁve preset destinations. have been previously input. As new destinations These destinations are stored on the numbered are entered, the system will automatically delete the buttons shown on the bottom of the ENTER...
Page 54 To edit the name of a preset destination, do the To add or change the phone number of a preset following: destination, do the following: 1. Touch the Preset Dest. screen button from the 1. Touch the Preset Dest. screen button from the STORED LOCATIONS screen.
Page 55: Navigation Set Up
Navigation Set Up To delete all of the preset destinations: 1. Touch the Preset Dest. screen button from the STORED LOCATIONS screen. 2. Select the Del.All screen button. 3. The system will display a pop-up conﬁrmation message. Select Yes to delete all of the preset destinations;...
Page 56 Two-Dimensional/Three-Dimensional Map Screen 2D/3D: This will change the view of all map screens. (2D/3D) View Guidance Screen 2D/3D: This will change the view of 2D/3D View: Touch this screen button from the the map screen while driving during route guidance. NAVIGATION SET UP screen.
Page 57: Quick Poi Selection
Quick POI Selection To replace the default POI categories on the Quick POI (Q-POI) screen, do the following: Quick POI Selection: This feature allows you 1. Select the Quick POI Selection screen to select the POI categories you want available on button from the NAVIGATION SET UP menu.
Page 58: Quick Poi
Quick POI Once categories have been selected on the Q-POI SELECTION screen, the POI categories are now available on the Quick POI screen. From this screen you can select the POI icons that you would like to display on the map screen. You can either select a POI for a ﬁnal destination or as a waypoint.
Page 59 All Local POIs All Category List: This screen button will appear once the List Categories screen button has been selected. 1. Select this screen button to select a POI as a Press this screen button to display a list of destination.
Page 60 Calibration 2. To change your vehicle’s position, touch the map screen. Use the zoom in/out function to view the direction of Calibration: Touch this screen button from the the desired area. NAVIGATION SET UP screen. This feature allows you Pressing/holding and dragging on the map will to recalibrate the navigation system.
Page 61: User Settings
User Settings From this screen, you can adjust the following: Road Restriction Warnings: This option instructs the User Settings: Touch this screen button from the system to notify you when the current route has NAVIGATION SET UP screen. This feature allows traffic restrictions.
Page 62: Restore System Defaults
Restore System Defaults Guidance Volume > Restore System Defaults: Select this feature Guidance Volume: This feature allows you to from the NAVIGATION SET UP screen to change adjust the volume of voice guidance prompts. Select Off all adjustable system settings to factory defaults. to turn voice guidance prompts off.
Page 63 Route Options The search condition screen allows you to view your current destination and to change the planning Select Change Route from the NAV. MENU screen to methods between each destination. Each distance access the ROUTE OPTIONS screen. This menu between waypoints and ﬁnal destination can have has many features to customize route guidance.
Page 64: Route Preferences
Detour Route Preferences Detour: Select a detour if there is construction Route Pref. (Route Preferences): You can select work, or traffic delays that prevent the original route from to have certain types of roads/ferries included in being used. your route. See “Getting Started on Your Route” under Enter Destination on page 2-11 for more information.
Page 65 (Allow Time Restricted Road): This feature allows the system to use time restricted roads when calculating a route. These are roads that may be closed during the winter season. (Allow Toll Road): This feature allows the system to use toll roads or pay roads when calculating a route. (Allow Ferry): This feature allows the system to use ferries when calculating a route.
Page 66: Display Route
Display route Avoid: To avoid a street, select the Avoid screen button next to the turn. To cancel the avoided turn, select Avoid again to deselect it. Display route: Select this button from the ROUTE OPTIONS menu to view the entire route. The start Reroute: After selections have been made, press the point and destination, the time it will take to reach the Reroute screen button to replan the route.
Page 67 Route Preview (Scroll to Start Point): Touch this screen button to start a smooth scroll of the route backwards to the Route Preview: Select this button from the start point, previous waypoint, or the previous available POI, depending on the mode selected. Touch this ROUTE OPTIONS menu to preview the entire route in button again to increase the scroll speed.
Page 68 Once the route has been calculated, this screen will To next Dest. (Destination) or WP (Waypoint): Select display. From this map screen, touch Guide to this button to have the skip/scroll functions skip/scroll begin route guidance or touch Chg. route to return to to the next destination or waypoint.
Page 69 Keyless Access System This system may not be available/or interference may occur if the following happens: When you start your vehicle you will see Driver 1 or • Signal obstructions caused by tall buildings, large Driver 2 displayed on the driver information center (DIC). trucks, tunnels, The number on the back of the RKE transmitter •...
Page 70 Vehicle Positioning • The vehicle is entering and/or exiting a parking lot, garage or a lot with a roof. At times, the position of the vehicle on the map may be • The GPS signal is not received. inaccurate due to one or more of the following •...
Page 71 Problems with Route Guidance • Automatic rerouting may display a route returning to the set waypoint if you are heading for a destination Inappropriate route guidance may occur under one or without passing through a set waypoint. more of the following conditions: •...
Page 72 If the System Needs Service Database Coverage Explanations If your system needs service and you have followed the The United States, excluding Alaska and Hawaii, and steps listed here and still are experiencing problems, portions of Canada are contained on one DVD disc. see your dealer for assistance.
Page 73 Section 3 Navigation Audio System Navigation Audio System ........3-2 CD Player ...........3-14 Six-Disc CD Changer ........3-19 Radio Personalization with Home and Away Feature ........3-23...
Page 74: Navigation Audio System
Navigation Audio System Your vehicle has a feature called Retained Accessory Power (RAP). With RAP, the audio system can be played even after the ignition is turned off. See Notice: Before adding any sound equipment to “Retained Accessory Power (RAP)” in the Index of your your vehicle, such as an audio system, CD player, vehicle’s owner manual for more information.
Page 75: Audio Adjust Screen
® Audio Adjust Screen If your vehicle has the Bose audio system, it includes ® Bose AudioPilot noise compensation technology. ® When turned on, AudioPilot continuously adjusts the (Audio/Adjust Screen): Press this key to audio system to compensate for background noise, view the audio and screen settings.
Page 76 Clock Touch the clock symbol at the bottom of the audio/adjust screen or touch and hold the time display in the upper right corner of any menu to access the CLOCK ADJUST menu. Touching the time display will also display the date on the status bar at the top of the screen.
Page 77 Screen Adjust GPS TIME: The current GPS time will be displayed to the right of this button. Touch GPS TIME to set the To adjust the contrast or brightness of the screen, navigation system’s time to match current GPS time. touch SCREEN ADJUST at the bottom of the audio/adjust screen.
Page 78: Finding A Station
Finding a Station and brightness of the screen based on outside lighting conditions. Press the SRCE hard key to display the operation DAY: This setting leaves the screen in day mode. screen of the current audio source. Each operation Day mode is best suited for daylight conditions. screen has an audio source screen button, (AM, FM1, FM2, XM1, XM2, if equipped, and CD).
Page 79: Preset Station Menu
Preset Station Menu SCAN: To scan stations, touch SCAN. The radio will go to a station, play for a few seconds, then go on to the Up to 30 stations, 6 AM, 6 FM1, 6 FM2, 6 XM1, and next station. Touch SCAN again to stop scanning. 6 XM2, if equipped, can be programmed for home and To scan preset stations, touch and hold SCAN for for away (XM does not have the home and away...
Page 80: Sound Menu
Sound Menu To adjust sound settings, do the following: • Touch the plus (+) or minus (−) signs to adjust Touch SOUND at the bottom of the main audio screen treble, mid-range, and bass, if you are in the Manual or source menu to change the tone, ATC, fade, and mode of ATC.
Page 81 Adjusting the Speakers Radio Data System (RDS) The audio system has a Radio Data System (RDS). RDS features are available for use only on FM stations that broadcast RDS information. With RDS, the radio can do the following: • Seek to stations broadcasting the selected type of programming •...
Page 82 If the audio system is tuned to a station that is not INFO (Information): When RDS is on, if the current broadcasting RDS information, the station’s frequency station has a message, INFO will appear on the display. will remain on the display. Touch INFO from the preset menu to view the message.
Page 83 PTY (Program Type) Presets: The six presets let ALERT: This type of announcement warns of national you return to your favorite PTYs. These presets have or local emergencies. You will not be able to turn factory PTY preset stations. See “RDS Program off alert announcements.
Page 84 XM™ Satellite Radio Service Each of the four information types may have multiple pages of text. To reach a category, touch INFO once XM™ is a satellite radio service that is based in the and wait until the desired type is displayed. If there are 48 contiguous United States.
Page 85 XM Radio Messages Radio Display Message Condition Action Required XM Updating Updating encryption code The encryption code in the receiver is being updated, and no action is required. This process should take no longer than 30 seconds. No XM signal Loss of signal The system is functioning correctly, but the vehicle is in a location that is blocking the XM™...
Page 86: Cd Player
Radio Display Message Condition Action Required XM Theftlocked Theft lock active The XM™ receiver in the vehicle may have previously been in another vehicle. For security purposes, XM™ receivers cannot be swapped between vehicles. If this message is received after having your vehicle serviced, check with your dealer.
Page 87: Playing A Cd
Playing a CD Notice: If you add any label to a CD, insert more than one CD into the slot at a time, or attempt Once a music CD is loaded, the CD player menu will to play scratched or damaged CDs, you could appear on the display.
Page 88 REPEAT TRACK: Touch this button to repeat the selected track. (Rewind): Touch this button to rewind quickly through a track selection. (Pause): Touch this button to pause CD play. Touch it again to resume play or touch the play button. (Forward): Touch this button to fast forward quickly through a track selection.
Page 89 Using an MP3 • DVD with MP3 are not playable on this system. • The radio will not play a mixed mode CD-R/RW, a MP3 Format disc recorded with both *.cda and *.mp3 ﬁles. When creating an MP3 disc, the following is a list of •...
Page 90 Playing an MP3 If playing a CD-R the sound quality may be reduced due to CD-R quality, the method of recording, the quality of the music that has been recorded, and the way the CD-R has been handled. There may be an increase in skipping, difficulty in ﬁnding tracks, and/or difficulty in loading and ejecting.
Page 91: Six-Disc Cd Changer
Six-Disc CD Changer RANDOM: Select this screen button to play the tracks, in the current folder, in random, rather than sequential, order. Select this button again to turn off random play. If your vehicle has the CD changer, you can play up to six discs continuously.
Page 92 Once you have loaded the discs into the magazine, Close the door by sliding it all the way to the right. slide the CD changer door open. Push the magazine into When the door is closed, the changer will begin the changer in the direction of the arrow marked on checking for discs in the magazine.
Page 93 To eject the magazine from the player, slide the CD changer door all the way open. Press the EJECT button, located inside of the changer door, and the magazine will eject. Remember to keep the door closed whenever possible to keep dirt and dust from getting inside the changer.
Page 94 « ª REPEAT TRACK: Touch this button to repeat the track TUNE SEEK : Press the up arrow to seek to the on the selected CD. Touch this button again to turn next selection on the CD. If playing the last track of off repeated play.
Page 95: Radio Personalization With Home And Away Feature
Radio Personalization with Home To select HOME and AWAY preset stations, do the following: and Away Feature 1. With the audio system on, touch the Audio hard key and turn the audio system off. If your vehicle has this feature, you can recall the latest audio system settings as adjusted the last time your 2.
Page 96 NOTES 3-24...
Page 97 Section 4 Voice Recognition Voice Recognition ..........4-2...
Page 98 Voice Recognition You may end voice recognition by not speaking any commands. After about ﬁve seconds of silence, the system will automatically cancel voice recognition. The navigation system’s voice recognition allows for hands-free operation of navigation and audio system At times, the system may not understand a spoken features.
Page 99 Help Commands Power Off, Audio Off: These commands will turn the system’s power off. These commands are universal and will enable you to Seek Up: This command will cause the selected audio use the help prompts available from the system. source to seek to the next strongest station.
Page 100: Map Commands
Position Commands North Up, Change to North Up: These commands will cause the system to display the North Up heading Current Position, Current Location, Show Current when on the map screen. Position, Show Current Location: These commands Map Direction, Change Map Direction: These will cause the system to display the vehicle’s current commands will cause the system to change the vehicle’s location on the map screen.
Page 101 Destination Commands Right Map [Change to] / [Show] North Up [Mode]: These commands will cause the system to display Home, Go Home: These commands will cause the the North Up heading on the right map when in dual system to enter the Home destination as a waypoint or map mode.
Page 102 Enter Destination: This command will cause the [Change to] Turn List (Guide/Guidance): These system to add the current marked point as the ﬁnal commands will cause the system to change to Turn List destination. This command is used after the following Guidance screen view in the Guidance Menu if a commands have been used: Home, Go to Starting Point, destination has been set.
Page 103 Point of Interest (POI) Commands Next Waypoint Map: This command will cause the system to display the map view of the next waypoint The following commands will cause the system to location if one has been set. display icons if they are available on the map screen when the map scale is set to ⁄...
Page 104 Entertainment Locations Financial and Government Offices • • Amusement Park • • Botanical garden Bank • • Campground Business Facility • • Casino City Hall • • Cinema Civic Center, Community Center • • Golf Course Convention Center, Exhibition Center •...
Page 105 Personal Services Shopping Locations • Convenience Store • Beauty and Barber Shops • Department Store • Dry Cleaning • Grocery Store • Health and Fitness Club • Home and Garden Restaurant Locations • • Other Retail Store American Restaurant, American Food •...
Page 106 NOTES 4-10...
Page 107: Cleaning The Display
Address ............2-13 Database Coverage Explanations ...... 2-58 Alpha-Numeric Keypad ........2-3 Destination & Waypoint ........2-36 Audio Adjust Screen ......... 3-3 Destination and Waypoint ......... 2-51 Audio System ..........3-2 Detour ............2-50 Auto Reroute ..........2-10 Display, Cleaning ..........1-12 Avoid Area .............
Page 108 Map Appearance ..........2-8 Map Scales ............. 2-4 Getting Started, Navigation ........ 1-4 Maps .............. 2-3 Getting Started on Your Route ......2-27 Memory Points ........2-20, 2-30 Global Positioning System (GPS) ...... 2-55 Guidance Volume ........1-12, 2-48 Navigation Getting Started ..........
Page 109 Regional Maps ..........2-3 Restore System Defaults ........2-48 Phone Number ..........2-24 Route Preferences .......... 2-50 Playing a CD ..........3-15 Route Preview ..........2-53 Playing the Radio ..........3-2 Point of Interest (POI) ........2-15 Preset Destination ........2-26, 2-39 Preset Station Menu .........
Page 110 Touch-Sensitive Buttons ........2-3 Vehicle Positioning .......... 2-56 Traveling Across Regions ......... 2-10 Voice Recognition ..........4-2 Two-Dimensional/Three-Dimensional Voice Recognition Commands ......4-2 (2D/3D) View ..........2-42 XM Radio Messages ........3-13 User Settings ..........2-47 XM™ Satellite Radio Service ......3-12 Using an MP3 ..........

Chevrolet 2006 Corvette Navigation Manual

Section 1 Overview

Section 2 Features and Controls

Section 3 Navigation Audio System

Quick Links

Chapters

Related Manuals for Chevrolet 2006 Corvette Navigation

Summary of Contents for Chevrolet 2006 Corvette Navigation

Table of Contents