Vehicle Personalization; Memory - Chevrolet 2006 Corvette Owner's Manual

Vehicle Personalization

In addition to the following features, your vehicle may
also have features that can be programmed through
the Driver Information Center (DIC). See DIC Vehicle
Personalization on page 3-68 for more information.

Memory

If your vehicle has this feature, memory can program
and recall the settings for the driver's seating position.
The controls for this feature are located on the
driver's door.
2-72
The numbers on the back of the keyless access
transmitters, 1 and 2, correspond to the numbers
on the memory buttons.
To program each button, use the following steps:
1. Adjust the settings for the driver's seat position,
both outside mirrors, and the telescopic steering
column position to a comfortable driving position.
2. Press and hold button 1 until two beeps are heard,
then release the button.
Your settings are now programmed.
A second seating, mirror, and telescopic steering
column position can be programmed by repeating
the above steps and pressing button 2 for driver 2.