Repeater - Gigaset E380 A Care User Manual

Locating a handset (Paging), finding the telephone's IP address
¤
Briefly press the Registration/paging key on the base station.
All handsets will ring at the same time (paging), even if ringtones are
switched off. Exception: handsets on which the baby monitor is
activated.
The current (local) IP address for the base station appears in the
handset displays.
Ending the search
¤
Briefly press the registration/paging key on the base station
or Press the End call key
or Press the display key Silence on the handset
or No action. After approx. 30 seconds, the paging call will end automatically.
Changing the handset name and internal number
When registering multiple handsets, they will automatically be assigned the names INT 1, INT 2
etc. Each handset will automatically be assigned the lowest unassigned internal number. The
internal number is shown as the name of the handset on the display e.g. INT 2. You can change
the names and the numbers of handsets. The name must not exceed 10 characters in length.
¤
. . . the list of handsets is opened, the current handset is highlighted with <
to select a handset . . . possible options:
Edit name:
Edit number:

Repeater

A repeater increases the receiving range between the Gigaset handset and the base station.
The registration procedure for a repeater depends on the version of the repeater being used.
•
Repeater without encryption, e.g. Gigaset repeater prior to Version 2.0
•
Repeater with encryption, e.g. Gigaset repeater later than Version 2.0
Further information about the Gigaset repeater can be found in the repeater user guide and at
www.gigaset.com.
on the handset
¤
Options Rename
name . . . use
¤
Options Edit Handset No.
number Save
OK . . . use
to enter a new name
OK
Repeater
Paging
IP: 192.168.1.2
Silence
. . . use
to delete the current
OK
. . . use to select a
83