Operating A Repeater; Changing The System Pin - Gigaset A670A Manual

Operating a repeater

You can use the Gigaset Repeater to increase the range of your Gigaset handset.
The function and setting of your repeater depends on the repeater version used. The repeater
version can be identified by the item number on the product label:
Gigaset Repeater (earlier than version 2.0) S30853-S601-...
Gigaset Repeater 2.0
For additional information, see the repeater user guide and our website at
www.gigaset.com
Gigaset Repeater (earlier than version 2.0)
Prerequisites:
u
ECO DECT function Maximum Range must be activated.
u
ECO DECT function No Radiation must be deactivated.
u
Encryption must be deactivated:
Ï
¤ ¤
v
OK
Modifying the ECO DECT functions
Registering a repeater:
¤
Connect the repeater to the mains power supply.
Registration/Paging key on the base (A670A
¤
). The repeater registers automatically.
You can register up to 6 repeaters.
Gigaset Repeater 2.0
Registering the Gigaset Repeater 2.0:
¤
Connect the repeater to the mains power supply.
Registration/Paging key on the base (A670A
You can register a maximum of 2 Gigaset Repeaters 2.0.
The ECO DECT function Maximum Range is activated and No Radiation is deactivated. The set-
tings cannot be changed whilst the repeater is registered.
De-registering the Gigaset Repeater 2.0:
Ï
¤ ¤ ¤
v q System
OK

Changing the system PIN

Ï
v ¤ ¤ ¤ q System
OK
¤
If current PIN not 0000: enter current PIN
¤
Enter new system PIN (4 digits; 0 - 9)
¤ ¤
q System
OK
¢
page 32.
¤ ¤
OK
¤ ¤
OK
¤
S30853-S602-...
¤ ¤
q Encryption
¤
Press and hold (min. 3 secs) the
¢
page 2
¤
Press and hold (min. 3 secs) the
¢ ¤
page 2). The repeater registers automatically.
¤
q Repeater
OK
q System PIN ¤
OK
¤
OK
Save
Operating a repeater
´
Change ( = deactivated)
¤
q Select repeater.
¤
De-reg.
31