Activating/Deactivating Music On Hold; Repeater Support; Restoring The Base Station To The Factory Settings - Gigaset E490 User Manual

Changing the system PIN
You can change the 4-digit system PIN set on
the base station (default setting: 0000) to a
4-digit PIN known only by you.
Gigaset E495: Setting a system PIN facilitates
remote operation of the answering machine
(page 43).
¢ ¢ ¢
Ð
v
Base
~
Enter the current system PIN
and press
~
Enter new system PIN. For secu-
rity reasons, the PIN is shown as
four stars ( **** ).
s ~
Jump to the next line, re-enter
new system PIN and press
a
Press and hold (idle status).
Resetting the system PIN
If you have forgotten your system PIN you
can reset the base station to the original
code 0000:
Disconnect the power cord from the base
station. Hold down the registration/paging
key on the base station while reconnecting
the power cable to the base station. Release
the key after a while.
The base station has now been reset and the
system PIN 0000 set.
Please note
All handsets are deregistered and must
be re-registered.
Activating/deactivating
music on hold
¢ ¢ ¢
v Ð
Base
§OK§
Press to activate or deactivate music on
‰
hold ( = on).
System PIN
§OK§
.
§OK§
.
Music on hold

Repeater support

With a repeater you can increase the range
and reception strength of your base station.
You will need to activate repeater mode. This
will terminate any calls that are in progress at
the time.
Precondition: A repeater is registered. The
Eco Mode / Eco Mode+ is deactivated.
¢ ¢ ¢
v Ð
Base
¢
Repeater Mode
§Yes§
Press the display key.
When repeater mode is active, the menu
item is marked with
Please note
Repeater support and Eco Mode/Eco
¢
Mode+ ( page 45) cancel each other
out, i.e. both functions cannot be used at
the same time.
Restoring the base station to
the factory settings
When the settings are restored:
u
handsets are still registered
u
the system PIN is not reset
¢ ¢ ¢
v Ð
Base
~
Enter the system PIN and
§OK§
press
§Yes§
Press the display key.
Cancel the restoring process by pressing
a or the display key
a
Press and hold (idle status)
Base station settings
Add. Features
‰
.
Base Reset
.
§No§
.
55