Getting Started; Handset - Gigaset E380 A Care User Manual

Parts of the phone Gigaset E380A Care
•
One base (E380A Care),
•
One power adapter for the base,
•
One phone cable (for an analogue phone connector),
•
One LAN cable (for connecting to your router),
•
One handset (E380H Care),
•
One battery cover
•
Two batteries
•
One charging cradle including power adapter
•
A user guide
The base station and charging cradle are designed for use in closed, dry rooms within
a temperature range of +5 °C to +45 °C.
Position the base on a level, non-slip surface at a central point in the flat or house. The
device's feet do not usually leave any marks on surfaces. However, due to the multi-
tude of different varnishes and polishes used on furniture, contact marks on the
surfaces cannot be completely ruled out.
Never expose the telephone to heat sources, direct sunlight or other electrical
devices.
Protect your telephone from moisture, dust, corrosive liquids and vapours.
This device is only suitable for a maximum installation height of 2 m.

Handset

Connecting the charging cradle
¤
Connect the flat plug of the power adapter
¤
Plug the mains unit into your power socket
To remove the plug from the charging cradle again:
¤
Disconnect the power adapter from the mains
power supply.
¤
Press the release button
¤
Pull out the plug

Getting started

.
3
.
4
.
1
.
2
2
Getting started
4
1
3
11