Table of Contents
Advertisement
w Engage the rear-side screw of the camera with
the screw hole of the camera attachment and
rotate the camera in the direction of the arrow
to secure the camera to the camera attach-
ment.
Rotate the camera until a click is heard so that
the projection of the camera attachment will be
set to the "LOCK" position.
e Connect the cables on the side of the mount
bracket. (
Page 26)
☞
Waterproof the connecting portion. (
29)
Note:
• Disconnect the 12 V power source and PoE
power source to prevent power from being sup-
plied during mounting work.
r Accommodate the connected cables inside the
cable guide of the camera mount bracket.
Important:
• To prevent the cables from being caught when
the base cover is attached, keep the cables
inside the cable guide.
Projection
Page
☞
Cable
guide
Connected
cable
Make cable connection and
waterproof the connected section.
Cable
guide
33
Advertisement
Table of Contents
