Table of Contents
Advertisement
Do not rub the edges of metal parts with
your hand.
Failure to observe this may cause injury.
Do not touch this product, the power cord
or the connected cables during thunder.
(even in the process of work)
Failure to observe this may cause electric
shock.
Turn the power off when cleaning this
product.
Failure to observe this may cause injury.
[Precautions for use]
This product has no power switch.
When turning off the power, turn off a circuit
breaker.
To keep on using with stable performance
Do not use this product in hot and humid con-
ditions for a long time. Failure to observe this
causes component degradation resulting in life
shortening of this product.
Do not expose the product to direct heat
sources such as a heater.
Do not touch the dome cover with your
bare hands.
A dirty dome cover causes deterioration of pic-
ture quality.
Handle this product with care.
Do not drop this product, nor apply shock or
vibration to the product. Failure to observe this
may cause trouble. If a strong shock or vibra-
tion is applied to the enclosure, it may cause
damage or allow water to enter this product.
About the PC monitor
Displaying the same image on a monitor for a
long time may damage the monitor. It is recom-
mended to use a screen-saver.
12
Product disposal/transfer
Images saved on the SDHC/SD memory card
may lead to personal information leakage.
When it is necessary to dispose or give this
product to someone, even when for repair,
make sure that there is no data on the hard
disk drives.
Cleaning this product body
Be sure to turn off the power before cleaning.
Failure to observe this may cause injury. Do not
use strong abrasive detergent when cleaning
this product. Otherwise, it may cause discolor-
ation. When using a chemical cloth for clean-
ing, read the caution provided with the chemi-
cal cloth product.
Cleaning the lens
Use a lens cleaning paper (used to clean cam-
era lenses or lenses of spectacles). When using
solvent, use an alcohols solvent and do not use
a thinner or a glass cleaner.
Transmission interval
Image transmission interval may become slow
depending on the network environment, PC
performance, shooting subject, access num-
ber, etc.
About SDHC/SD memory card
• Before inserting the SDHC/SD memory
card, turn off the power of this product
first. Otherwise, it may cause malfunction
or damage data recorded on the SDHC/
SD memory card. Refer to page 23 for
descriptions of how to insert/remove an
SDHC/SD memory card.
• When using an SDHC/SD memory card,
format it using this product. Recorded data
on the SDHC/SD memory card will be
deleted when formatted. If an unformatted
SDHC/SD memory card or an SDHC/SD
memory card formatted with other devices
is used, this product may not work proper-
ly or performance deterioration may be
caused. Refer to the Operating Instructions
(PDF) for how to format a SDHC/SD mem-
ory card.
Advertisement
Table of Contents
