Table of Contents
Advertisement
x
Connect an external amplifier-embedded speaker to the audio output cable (for use of the
audio transmission function).
Connect a stereo mini plug (ø3.5 mm) (Audio output is monaural.).
• Recommended cable length: Less than 10 m {32.8 ft}
c
Connect the alarm input/output cable.
<Ratings>
Terminal name
ALARM OUT, AUX OUT
Open
Close
ALARM IN, DAY/NIGHT IN Non-voltage make contact input (4 V DC - 5 V DC, internally pulled
OFF
ON
Note:
• Check if rating of an external device such as a sensor is applicable to the rating of this product
by referring to the provided operating instructions.
Specification of 4P alarm cable (accessory)
Ratings
Open collector output (maximum applied voltage: 20 V DC)
4 V DC - 5 V DC by internal pull-up
Output voltage 1 V DC or less (50 mA or less)
up)
Open or 4 V DC - 5 V DC
Make contact with GND (required drive current: 1 mA or more)
GND (black)
AUX OUT (gray) (Terminal 3)
ALARM OUT (red) (Terminal 2)
ALARM IN, DAY/NIGHT IN (green) (Terminal 1)
27
Advertisement
Table of Contents
