Loading Paper - Datamax PrintPAD Series User Manual

PRINTPAD 7900 USER'S GUIDE

Loading Paper

1. Press a new roll of paper into the paper cavity. The
end of the roll should exit from the bottom of the
paper cavity and face the printer's roller (Figure 4).
When properly installed, the roll of paper "latches"
into place.
Figure 4
2. Raise the printhead release lever until it is fully
open. The lever clicks midway at the partially open
position; however, do not stop here, continue to
raise the lever until it is fully open (Figure 5).
3. Wake up the printer by momentarily pressing the
red self-test button (Figure 6).
Figure 5
4. Feed the end of the paper under the roller until the
paper exits from the top of the printhead (Figure 7).
Verify the paper exits straight.
End of paper roll
Roller
Paper latch
Printhead
release
lever
Figure 6
5
Self-
test
button