Datamax PrintPAD Series User Manual page 76

Printing a Self-Test
1. Open the printer's cover.
2. Press and hold the red self-test button for 4-5 seconds, until the printer starts to print (Figure 13).
Figure 13
3. After printing starts, release the red self-test button.
Configuring the Printer
The printer has many configurable settings. To configure or upgrade firmware, download the Windows
configuration program.
Using the Printer Data Cables
1. Select the appropriate cable for use with the host and/or device you are using.
2. Insert the plug into the printer's data port (Figure 14).
Figure 14
Note: Do not close the lid or damage will occur to the cable. The data cable is intended only for reflashing the
printer.
6
PrintPAD Dolphin 99EX USER GUIDE