Installing The Paper Roll; Install Paper Roll; Tearing Paper - Datamax Apex 3 Quick Start Manual

Portable thermal receipt printer

Hide thumbs Also See for Apex 3:

Installing the Paper Roll

1. Open the Paper Supply Cover by placing your ﬁ ngers under the "T"

pull lever and pulling up ﬁ rmly on the supply cover until the lever stops

moving. The cover should open to a 90° angle.

3. Close the Paper Supply Cover.

4. Turn the printer ON by pressing the Power button and test the paper

advance function by pressing the paper feed button. Verify that paper

advances correctly.

To tear paper: The printer's

paper door acts as a tear

bar. Pull one edge of the

paper against the tear bar

as indicated, then tear

down and across against

the tear bar to tear the

paper.

Note: Do not pull too ﬁ rmly. Use

Note: Pull Paper Roll Leader Out

of Printer. Note Direction of

Paper Travel.

Note: Pulling up and/or sideways without using the

tear bar can cause a paper jam due to paper

misalignment in the printhead mechanism.

only enough force to allow

the cover to unlock and

lift freely.

Table of Contents