Datamax PrintPAD Series User Manual page 79

PrintPAD Dolphin 99EX USER GUIDE
Using a CardReader
Note: The following information applies to printers with the CardReader option.
Figure 16
General Guidelines
To wake up the CardReader, insert a card into the CardReader slot. One short beep indicates the CardReader/

printer is awake.
If you are using a Magnetic CardReader, insert a card with the stripe facing away from the printer. The card

can be swiped in either direction.
For information on CardReader LED indicators and audio indicators, see

CardReader Indicators
Audio Indicators
Beep
1 long
2 short
Using External Charging
Note: he following information applies to printers installed with external charge capabilities.
T
Figure 17
Overview
External charge-capable printers have two charging contact points located on the back of the printer's case (Figure
17).
Description
Bad read.
Good read.
(2) Charging contact points
CardReader Indicators on page 9.
Action
Swipe card again.
None.
9