Advertisement
To
P l a y
A Cassette Tape
F
0
Turn the radio on.
0
Insert the cassette through the tape door. (The "TAPE" indicator in
the display will light.)
1
If you hear nothing or hear just a garbled sound, the cassette may not be
7
tape equalization is automatically sensed and set. Insertin thecassette
in squarely. Push the EJCT button to remove the tape and start over. The
I
also automatically disables
DNR@* and activates DOLBY noise
0
reduction.
noise from the radio.
-
DNR@ is the Dynamic Noise Reduction. It helps remove background hiss,
a
Push the
FWD
button to move forward rapidly to another part of the
same button and the tape will start to play again.
7
tape. The radio will play during fast forward. To stop the tape push the
i
r -
REV (Reverse)
1
Push the REV button to move the tape rapidly backward. T o stop the
r
i.
will play during this reverse function.
tape, push the same button lightly or any of the other buttons. The radio
To go from one side of the tape to the other,
push in the upperAnob on
your radio. To remove the tape, push EJCT. The tape can be ejected when
i
the ignition is turned
off.
*DNR@
is a registered trademark of National Semiconductor
r
corporation.
Advertisement
