Repositioning The Operator Panel And 5-Inch Storage Bays - Fujitsu PRIMERGY PG-R1CK21 Manual

3.3
Repositioning the operator panel and 5-inch
storage bays
To convert the server to a rackmount, you must reorient the operator panel and 5-inch storage bay
components as follows:
Before
Removing the fixation feet
1
Horizontally knock down and put the server. And then detach the
screw in three places where the foot of the server is fixed.
2
Move the plate to the rear of the server. Then pull forward and
detach it.
Operator panel
5-inch storage bay
CD-ROM drive
After
3 Converting the server and installing to the rack
E
41