Fujitsu PRIMERGY PG-R1CK21 Manual page 31

Safety
For your safety and that of others, follow the guidelines provided on the following pages concerning
the use of the rack conversion kit and server.
For notes on installing and using the server, refer to "Safety Precautions" attached to the server.
Please read the notes and use the server correctly.
WARNING
• When installing or removing the server from the rack, turn off the server, all
peripheral devices, the display, and any other connected devices. Also unplug all
power cords.
Failure to do so can lead to electric shock.
• Do not damage or modify internal cables or devices. Doing so may cause a
device failure, fire, or electric shock.
CAUTION
• Contact your maintenance engineer to install or remove a server from the rack
cabinet.
• For safety reasons, make sure the server is located on a stable and level surface
when performing the conversion work as the combined weight can be 29kg.
• Also, work in an open space as the rackmount must be laid horizontally to
perform the conversion.
• Devices inside the server remain hot after shutdown. Wait for approximately 10
minutes after shutdown before installing or removing hardware options from the
server.
• Do not obstruct the ventilation slots. Poor ventilation traps the heat inside the
server, which can lead to fire.
• Do not string the connecting cables in a way that they become trip hazards.
Doing so may cause failure.
• Do not block the ventilation slots in the front and rear of the server. Poor
ventilation traps the heat which can lead to fire.
• Move the unit with care. Shut down all power sources and disconnect all cables
and peripherals (e.g. mouse, keyboard, etc.). Also be aware that depending on
the hardware options installed, this rackmounted unit can weight up to 29kg.
E
31