Fujitsu PRIMERGY PG-R1CK21 Manual page 28

Introduction
We at Fujitsu would like to thank you for choosing to purchase the PRIMERGY TX150 S5 Rack
Conversion Kit.
This PRIMERGY TX150 S5 Rack Conversion Kit enables you to convert your server from a tower
type to a rackmount type.
This manual explains how to use the PRIMERGY TX150 S5 Rack Conversion Kit.
Please read the information outlined in this manual when using the PRIMERGY TX150 S5 Rack
Conversion Kit.
For safety use
Important information to use this product safely and correctly has been described in this manual.
Please peruse this manual before using this product. Use this product after often reading "Safety" of this manual and being
understood especially.
Keep this manual carefully to read at any time while using this product.
Rack cabinet types
This kit can be installed in the following rack cabinets.
Rack Type
Standard rack cabinet
28
PG-R6RC1, PG-R6RC2, PG-R4RC1, PG-R4RC2, PG-R4RC3,
PG-R4RC4, PG-R3RC1, PG-R3RC2
[Standard rack cabinet]
Product ID
November 2006